电泳工件磷化介绍中英对照版

Phosphating 磷化 The final recirculated D.I. water rinse should be maintained below 100 micromhos to prevent contamination of the paint bath by carry-in of phosphate chemicals. The exterior surface should be thoroughly rinsed with fresh D.I. water below 25 micromhos to assure a uniform surface conductivity on the body and to dilute the recirculated rinse. Phosphated bodies should frequently be examined to assure that they: 进行最后的循环去离子水冲洗时，其电导率要维持在100 μｓ／ｃｍ以下，已将由于带入有害磷化药品导致漆液污染的机会减少到最低限度。车身外表面要用低于25μｓ／ｃｍ的新鲜去离子水彻底冲洗以确保车身表面电导率均一，并稀释循环冲洗液。磷化后的车身要经常检查以确保： Are free of metal filings, 无金属屑 Have minimal residual stamping oil, and 极微的残留冲压油 Have phosphate coatings of proper weight which are free of blemishes or patterns. 磷化膜重适当，无污点或花纹

本文链接：http://phb.hhpj.net/post-353.html

电泳磷化工件